Enakovreden:
● AESSEAL PRETVORNIK II
Delovne omejitve:
● Temperatura: -20 stopinj – plus 220 stopinj
● Tlak: Manjši ali enak 25 barom
● Hitrost: Manjša ali enaka 15 m/s
● Velikost gredi: 24 mm - 100 mm / 1.0" - 4.0"
Materiali:
● Tesnilni obroči: ogljik iz smole, ogljik iz antimona, SIC, SSIC, volframov karbid
● Elastomer: FKM, FFKM, EPDM, AFLAS, NBR
● Kovinski del: SS304, SS316, Duplex, Hastelloy C, 904L
Montaža Dwg:
Mere (mm):
| D | D3 (min.) | D3 (maks.) | D1 | D2 | DM | L1 | L2 | L3 | S |
| 24 | 40 | 48 | 101.6 | 56.1 | 55.6 | 28.6 | 31.8 | 20.7 | 12 |
| 25 | 41 | 48 | 101.6 | 56.1 | 55.6 | 28.6 | 31.8 | 20.7 | 12 |
| 28 | 44 | 50 | 104.8 | 59.3 | 58.8 | 28.6 | 31.8 | 20.7 | 12 |
| 30 | 46 | 54 | 108 | 62.4 | 61.9 | 28.6 | 31.8 | 20.7 | 12 |
| 32 | 48 | 54 | 108 | 62.4 | 61.9 | 28.6 | 31.8 | 20.7 | 12 |
| 33 | 49 | 55 | 108 | 62.4 | 61.9 | 28.6 | 31.8 | 20.7 | 12 |
| 35 | 51 | 59 | 108 | 67.2 | 66.7 | 28.6 | 31.8 | 20.7 | 12 |
| 38 | 57.2 | 62 | 114.3 | 72 | 71.5 | 28.6 | 33.4 | 22.3 | 12 |
| 40 | 58 | 64 | 114.3 | 72 | 71.5 | 28.6 | 33.4 | 22.3 | 12 |
| 43 | 61 | 67 | 120.7 | 75.1 | 74.6 | 28.6 | 33.4 | 22.3 | 12 |
| 45 | 63.5 | 69 | 127 | 78.3 | 77.8 | 30.2 | 35 | 23.8 | 12 |
| 48 | 66.7 | 72 | 133.4 | 81.5 | 81 | 30.2 | 35 | 23.8 | 12 |
| 50 | 68 | 74 | 133.4 | 81.5 | 81 | 30.2 | 35 | 23.8 | 12 |
| 53 | 71 | 77 | 139.7 | 84.7 | 84.2 | 30.2 | 36.5 | 25.4 | 16 |
| 55 | 74 | 79 | 146.1 | 87.8 | 87.3 | 30.2 | 36.5 | 25.4 | 16 |
| 58 | 79.4 | 85.7 | 165.1 | 98.9 | 95.3 | 30.2 | 36.5 | 25.4 | 20 |
| 60 | 79.4 | 85.7 | 165.1 | 98.9 | 95.3 | 30.2 | 36.5 | 25.4 | 20 |
| 63 | 85.8 | 101.6 | 177.8 | 121.2 | 111.2 | 28.6 | 41.2 | 25.4 | 20 |
| 65 | 88.9 | 101.6 | 177.8 | 121.2 | 111.2 | 28.6 | 41.2 | 25.4 | 20 |
| 68 | 92.1 | 101.6 | 177.8 | 121.2 | 111.2 | 28.6 | 41.2 | 25.4 | 20 |
| 70 | 92.1 | 101.6 | 177.8 | 121.2 | 111.2 | 28.6 | 41.2 | 25.4 | 20 |
| 75 | 98.5 | 114.3 | 190.5 | 130.7 | 125.4 | 30.2 | 50.8 | 31.7 | 20 |
| 80 | 101.6 | 114.3 | 190.5 | 130.7 | 125.4 | 30.2 | 50.8 | 31.7 | 20 |
| 85 | 108 | 123.8 | 203.2 | 140.2 | 135 | 30.2 | 50.8 | 31.7 | 20 |
| 90 | 114.3 | 133.3 | 215.9 | 149.7 | 144.5 | 30.2 | 50.8 | 31.7 | 20 |
| 95 | 117.5 | 133.3 | 215.9 | 149.7 | 144.5 | 30.2 | 50.8 | 31.7 | 20 |
| 100 | 123.9 | 139.7 | 228.5 | 156.1 | 154 | 30.2 | 50.8 | 31.7 | 20 |
*Sorodni uvod*
Sistem mehanskega tesnila ima funkcijo prilagajanja in nadzora delovnega tlaka tesnila. Pri običajnih dvojnih mehanskih tesnilih je treba vzdrževati tlak izolacijske tekočine v tesnjeni votlini nekoliko nižje od tlaka tesnjenega medija, medtem ko je pri serijskem mehanskem tesnilu, ki postopoma zmanjšuje tlak, potrebno vzdrževati razlika tlaka tesnilne tekočine med stopnjami.
Priljubljena oznake: tesnila za kartuše convertor ii, Kitajska, dobavitelji, proizvajalci, tovarna, po meri, nakup, kakovost, cenik, ponudba, nizka cena, izdelano na Kitajskem
